HPU and Skids | Industrial Sector

<h3>Service and customer support</h3>
<h4>Contact our customer service and specialized support</h4>
<p>Hydroservice customer care has always been the added value of the company, and the personalized study of each project is the rule.</p>

Test bench for simulations on drill rock samples

Laboratory test bench with hydraulic reaction cell operating at 450°C, 400bar.

Test bench for BHT drill rod block simulation in drilling

Not only hydraulic installations, but complete and integrated solutions for laboratory tests.
Mechanics, hydraulics, automation, control and data acquisition to study and model an innovative system for drilling in the Oil&Gas sector.
The FRT test chamber is a device able to create the sticking condition due to differential pressure and investigate the type and the amplitude of forcing that allow...

Hydraulic unit for command and control of 1000 ton hot forming press

Design and production of a hydraulic power plant for the control of a forming press, a press that can develop a weight equal to 1000 Tons.

Hydraulic control unit for wood chipper command and control

Design and production of a hydraulic power plant for the control of a large wood chipper, a machine used to reduce the wood into small chips, by grinding of trunks and twigs.

Hydraulic system for command and control of continuous press for forming impregnated wood panels

Design and implementation of two plants for the same line for the control of a continuous woodworking press, through which wood panels are produced for various sectors.

Hydraulic command and control system for PVC Calender CR4 660 x 2150F

Structured hydraulic system designed to control a Calender for PVC.

Hydraulic system for drive and control Plastic injection moulding machine

Power station designed and built to control a vertical injection press for co-molding.

Hydraulic system for command and control 800 ton moulding press

It is a unit designed and built to control a forming press developing a force equal to 800T.

Oleodynamic press control system with optimised axis control automation

The customer expressed the need to simplify the architecture of the PLC in order to reduce the start-up times of the system and standardize the architecture of the control electronics.

Oleodynamic system for command and control of aluminium foil slitter rewinder RU6

It is an hydraulic power plant designed and built to control a slitter rewinder, a machine used in the converting sector to carry out work on material coils.

Hydraulic Power Unit for lubrication of the moving parts of a round bars peeler

The Hydraulic Power Unit designed by Hydroservice is used to lubricate only the moving components of a peeler, a machine that transforms hot rolled bars or forged bars in perfect round bars.

Hydrostatic Service and Lubrication Power Unit for Vertical Lathe

Hydroservice has been designed the Hydrostatic Service and Lubrication Unit for vertical lathe with double column.

Oleodynamic power plant for wood flake processing mill for chipboard

The plant moves the basket of a refining mill for dry flakes used in the production of chipboard panels.The hydraulic change system allows the replacement of the cutting ring of the mill in just 8 minutes!

Hydraulic system for handling steel billets inside a preheating furnace

This plant moves the billets inside a continuous cycle preheating furnace 24/7 through 27 synchronized hydraulic axes.

Manipulator for control unit for the forming of rounded bottoms - Cold forming

The control units of a hydraulic press for the cold forming of dished bottoms are equipped with a hydraulic manipulator, which is necessary for moving the bottom during processing.

Hydraulic units for the balancing of the vertical axes

Hydroservice is able to supply hydraulic units for balancing the vertical axes of machine tools of any shape, size and type.

Hydraulic unit for installation on CNC-controlled tube tapers

The hydraulic power unit is installed inside a 2-axis CNC-controlled tube shaper.Thanks to its compact design, it was possible to optimize the installation space.

Hydraulic unit for sheet metal processing lines

The hydraulic power unit (HPU) is used in the control and command of a sheet metal processing line, on which the safety and system isolating valves, called "hydraulic gates", are positioned.

Hydraulic power unit for calender roll closure drive

Construction of a hydraulic central for traditional plant calender 500 N (100 t) with 2000 mm table, for the activation of the closing of the calender rolls, with proportional adjustment of the thrust force.

Central lubrication unit for hydrostatic machine tool guides

Hydroservice has designed a hydraulic power unit dedicated to the lubrication of the hydrostatic guides of a vertical lathe. This HPU designed in such a way that the solution is low-noise.

Solution for docking ships with a suction cup

The solution designed by Hydroservice controla a movable arm, so that the suction cups are put in contact with the wall of the ship: the vacuum pump with which the machine is equipped sucks the air contained in the suction cup, effectively causing the ship to hook to the suction cups.

Hydraulic power unit for rectifier line

Hydroservice is able to supply complete hydraulic equipment for the lines of 2 hyperbolic rollers straightening machines.

Control unit with IO-Link instrumentation

The control unit performs the most classic of applications, namely the hydraulic control for locking and unlocking the equipment of a machining center.But in this case the difference, or rather the innovation, is given by the type of instrumentation and the connection method between the control unit and the electrical control panel of the machine.

Central unit for hydrostatic spindle lubrication and support

We have made a system able to maintain the hydrostatic support of a spindle based on customer specifications.

Power unit for sheet metal cutting line

Hydroservice has designed a power plant per line consisting of a sheet metal and a shear.
This central specification is suitable for machining in the automotive sector.

Hydrostatic power unit for vertical lathe

Hydroservice, at the customer's request, has created a central for vertical lathe capable of maintaining the head support of the hydraulic spindle.
The control unit has also been CE-PED certified and the components installed are of the IO-LINK type.

Hydraulic power unit for die sets for punching and coining presses

Central unit designed by Hydroservice for a mold holder for presses, usable both on blanking and coining systems.
The control unit is specifically dedicated to a 4000T press.

Hydraulic command and control unit for calender actuators

The hydraulic power unit in the picture provides the hydraulic power necessary to move the actuators of a 610x1600 4-cylinder calender.

Hydraulic unit for sheet metal working machinery

For a customer who produces machinery for sheet metal working in any material (mild steel, stainless steel, aluminium), Hydroservice has created a hydraulic power unit equipped with 8 motor-pump units, hydraulic blocks with proportional directional valves and pressurizing solenoid valves monitor.

Hydraulic unit for hot forging

For a company that designs and manufactures customized presses and complete lines for the hot forging of metals, we have created a hydraulic power unit with upper and lower extraction groups and monobloc for press auxiliaries.
As requested by the customer, the pump unit is immersed to reduce overall dimensions and a porthole has been inserted for pump inspection.Furthermore, two structures welded...

Realization of Hydraulic System for Calanders

Hydroservice has realized an hydraulic system composed of two independent hydraulic circuits for the simultaneous movement of two hydraulic cylinders, located in an industrial building in Singapore.

Four small HPU

Four small perfect HPU that will be used for chamfering and facing bars plants, smoothing the sharp edges of the machined piece, through an inclined cut and a turning operation of the end parts of a bar.
The Control Units were commissioned by a leading company in the production of complete plants for cold finishing of round bars.
For More...

Moving versatility: discover the innovative Hydroservice Mobile HPU

The Hydroservice Mobile Central represents a practical and innovative solution for the movement of actuators and the testing of static pressure hydraulic services. Designed to offer reliable performance and operational versatility, this control unit meets the needs of various industrial applications.

#Industrial

Special projects